Pallet Design System (PDS) Engineering
Request A Quote
What is the Pallet Design System?
The Pallet Design System (PDS) is the wood pallet industry's engineering platform for predicting how a pallet will perform before it is built. As a licensed PDS user, Troymill uses it to calculate safe load capacity, deflection, and service life for your load, so pallets that fit the program are sized to the job instead of to a guess.
PDS was built from university research. It was first released in 1984 by Virginia Tech in collaboration with the National Wooden Pallet & Container Association, built on testing at the university's William H. Sardo Jr. Pallet and Container Research Lab. Today it is maintained by Woodpack Global, the association formerly known as the NWPCA, and licensed to pallet manufacturers.
Who stands behind PDS?
When Troymill quotes an engineered pallet, the numbers come from a method the pallet industry built, tested, and has refined for four decades.

- University research roots. Developed at Virginia Tech from testing at the William H. Sardo Jr. Pallet and Container Research Lab, where it is still used to teach packaging engineering.
- Industry stewardship. Maintained by Woodpack Global (formerly the National Wooden Pallet & Container Association), the trade association for the wood pallet and container industry.
- Engineering-grade calculations. Calculations rest on established engineering principles, with finite element analysis at the core of how PDS models a pallet under load.
- Four decades of refinement. In use and updated since 1984, with reports available in eight languages for global supply chains.
What does PDS calculate for your pallet?
A PDS analysis looks at the pallet the way your operation actually uses it. The design is modeled against each way it will be supported, then checked for strength, stiffness, and durability.
Safe load capacity
The maximum load the pallet can safely carry in each support condition, plus the critical component that would fail first.
Deflection
How much the pallet bends under your load, checked against a deflection limit so it stays flat in racks and on conveyors.
Service life
Predicted trips before the first repair and before replacement, so you can weigh upfront cost against cost per trip.
Support conditions PDS models
| Support Condition | What It Means in Your Facility |
|---|---|
| Racked across the length | Pallet spans two rack beams with the beams running under the long dimension. |
| Racked across the width | Pallet spans two rack beams across the short dimension, often the toughest test for an under-built pallet. |
| Shelf support | Pallet sits on a solid shelf or deck. |
| Forklift handling | Pallet is lifted on the forks, with the load riding on the tines. |
| Stacked storage | Unit loads stacked one or more high in the warehouse or on the truck. |
Specification sheets and dimensioned 2-D and 3-D drawings come out of the same model, so the pallet you approve is the pallet we build. PDS load reports are available on request when applicable.
Why does an engineered pallet cost less to own?
Most pallet problems come from a design that was never checked against the load. PDS lands the design where it belongs.
Paying for wood you do not need
Extra board feet on every unit, heavier loads on every truck, and higher cost across thousands of pallets a year.
Sized to the load
Lumber species, board sizes, and fasteners chosen to meet your load and handling conditions with a known margin.
Paying in failures
Sagging in racks, broken deck boards, damaged product, and safety risk on the warehouse floor.
Send your load details. We will engineer the pallet around them.
Request a QuoteHow does Troymill use PDS on your order?
- Tell us about the load
Unit weight, footprint, and how the pallet will be stored and handled: racked, stacked, on conveyors, or on forks.
- We model it in PDS
When the design fits the PDS program, our team builds it in PDS, testing lumber species, board dimensions, and fasteners against every support condition that applies. If it falls outside what PDS can model, we tell you up front.
- Drawings and quote
Dimensioned drawings and pricing, typically within 24 hours. Ask for the PDS load report if you want the numbers behind the design.
- Production on our own lines
Your approved design runs on our Middlefield nailing lines. Standard builds take about 10 business days, with expedited scheduling at about 5 business days.
- Same spec, every reorder
Troymill keeps your approved design on file, so repeat orders match it load after load.
Where PDS applies, and where it does not
PDS is a pallet engineering platform, and Troymill applies it to pallets that fit the program: standard GMA 48″ × 40″, non-standard sizes in volume, and oversized pallets. Crates, dunnage, and specialty products are built from your drawings and samples.
Some pallet designs fall outside what PDS can model. Pallets with wedges on the top deck, and pallets with more than three layers of components (bottom deck, stringers or blocks, top deck, plus anything mounted on top), cannot be analyzed in PDS. Troymill still builds them to your specifications, and we will tell you at the quote stage whether your design can be engineered in PDS.
ISPM 15 heat treatment is available on request for export programs.
Which buyers benefit most from engineered pallets?
Any operation can use PDS, but it pays off fastest where loads are heavy, racking is tall, or a pallet failure stops a line.
Pallet Design System FAQs
What is the Pallet Design System?
The Pallet Design System (PDS) is an engineering platform for designing wood pallets and predicting how they will perform before they are built. It was first released in 1984 by Virginia Tech with the National Wooden Pallet and Container Association and is now maintained by Woodpack Global. Troymill is a licensed PDS user.
What does a PDS analysis tell me about my pallet?
A PDS analysis reports the safe load capacity and deflection of the pallet in each support condition, such as racked across the length or width, forklift handling, and stacked storage. It also predicts service life, including trips before the first repair.
Can every pallet be analyzed in PDS?
No. PDS cannot model pallets with wedges on the top deck or pallets with more than three layers of components, such as a bottom deck, stringers, a top deck, and something mounted on top. Crates, dunnage, and specialty products are also built from customer drawings and samples. Troymill confirms at the quote stage whether a design fits the PDS program.
What information do I need to send for a PDS-engineered quote?
Send the unit load weight, the pallet footprint, and how the pallet is stored and handled, such as racked, stacked, on conveyors, or moved by forklift or pallet jack. Annual volume and any export requirements help Troymill price the program accurately.
Can Troymill engineer a better version of the pallet I use now?
Yes, as long as the pallet fits the PDS program. Send a drawing, a written spec, or a sample of your current pallet. Troymill models it in PDS against your actual load and handling conditions, then shows where the design is stronger than needed, where it is at risk, and what an engineered version would look like.
Can PDS help lower my pallet costs?
Often, yes. Many pallets are over-built because nobody checked them against the real load, which means paying for extra lumber and extra freight weight on every unit. PDS sizes lumber species, board dimensions, and fasteners to the load, so the pallet carries what it must without wasted wood.
Will a PDS-engineered pallet hold up in my racking?
PDS checks the pallet racked across the length and across the width, and reports how much it will deflect under your load. That lets Troymill choose a design that stays within a safe load and a deflection limit for the way your racks are set up.
Can I get the PDS load report for my pallet?
Yes. Troymill provides the PDS load report on request when the design was engineered in PDS. Troymill also keeps approved designs on file, so reorders match the approved pallet.
How fast can Troymill turn around a PDS design?
Troymill returns dimensioned drawings and pricing typically within 24 hours. Standard production builds take about 10 business days, and expedited scheduling runs about 5 business days.
Can Troymill build engineered pallets in non-standard and oversized sizes?
Yes. Troymill builds the standard GMA 48 x 40 alongside non-standard sizes in volume and oversized pallets. Designs that fit the PDS program are modeled before production, and the Middlefield campus produces more than 50,000 pallets per week.
Get a Pallet Engineered for Your Load
Send unit weight, footprint, and how it is stored and handled. Drawings and pricing come back typically within 24 hours.
Request a Quote